No Answer Call Forwarding Management; Voice Mail Services; Voice Mailbox - Epygi Manual III User Manual

No Answer Call Forwarding Management

Using the Change the Forwarding Number option will change the first entry in the No Answer Call Forwarding table with Auto call type to
the inserted Forwarding Number. Any other entries with Auto call type, as well as with other call types will not be modified.
Please Note:

Voice Mail Services

The Voice Mail Services are divided into three parts: Voice
Mailbox, Personal Settings and Password Change. Each of
these parts has a hierarchy that is described below.
The following key combinations are available to navigate
through Voice Mail Services menus.

Voice Mailbox

After entering the voice mail services (using the keys
press the key to enter the Voice Mailbox menu. The following
key combinations are available to navigate within the new

messages.
During the message playback
functionality and serve to rewind and forward the message
•
for the timeout (by default 3 seconds) configured by the
extension user from Voice Mail
QX50/QX200/QX2000; (SW Version 6.0.x)
No Answer Call Forwarding Management
Toggle (enable or disable) the No Answer Call

Forwarding service again*

and keys change their
 
Settings.
QX50/QX200/QX2000 Manual III: Extension User's Guide

Change the Forwarding Number
Dial a new
and press
Forwarding Number
Confirm the new Forwarding Number with
press to dial a new Forwarding Number.
Voice Mailbox

*
After the first boot-up of the QX IP PBX or if the Voice Mail Configuration Wizard is
manually enabled by QX IP PBX's administrator, entering the Voice Mail Services for
the first time will activate the Voice Mail Configuration Wizard which will prompt the
essential user's personal settings. Below are instructions on how to proceed with the
Voice Mail Configuration Wizard from the handset.
for the first time after QX IP PBX's first boot-up,
reset factory default or Voice Mail Configuration Wizard activation
Dial the extension user's new
Confirm the extension user's new
Record a
Apply recorded Voice Mail Greeting and
move forward to the next step
Record a
Apply recorded User's name and exit
Exit

Voice Mail Services
)

Send a Message or Leave a

Reminder
Play Previous Message*

Print the attached FAX



or

*

Enter Voice Mail Services
Personal Settings Change Password


Enter Voice Mail Services
and press
Password
and press
Password
and press

Voice Mail Greeting
Record Voice Mail Greeting again
and press

User's name
Record User's name again

Enter Voice Mail Services
Go to the top of the Go one level up in the

oice Mail Services Tree Voice Mail Services Tree
V

Enter Voice Mail Services
Voice Mailbox Menu
Play First Message Get Date/Time Info

Play Current Message Play Next Message*

Play Last Message Delete Current Message










10