1. Manuals
  2. Brands
  3. Epygi Manuals
  4. PBX
  5. Quadro4x
  6. Manual

Epygi Quadro4x Manual

Increasing quadro fxo capability with mediatrix
Hide thumbs Also See for Quadro4x:
Table of Contents

Advertisement

Quick Links

Download this manual
Increasing Quadro FXO Capability
with Mediatrix
Revision
Initial draft
Revised
Revised
Formatted
Quadro
Quadro4x/16x
variants:
Valid for
All Quadro4X/16 version 3.0.n software
SW-version:
Tested with
SW-SOHO-3.0.5
SW version:
Increasing Quadro FXO Capability with Mediatrix.doc
Filename:
Version:
1
Template:
SupportTemplate.dot
Last saved:
29.03.2005 16:08 by Isolde Trautwein
Abstract: This document explains how to connect the Mediatrix
1204 to Quadro4x/16x and configure both devices so
that the Mediatrix FXO ports can be used as
additional Quadro FXO ports.
Please
Note:
THIS
PROPRIETARY INFORMATION OWNED BY EPYGI TECHNOLOGIES LTD. ANY
COPYING;
USE
OR
INFORMATION CONTAINED HEREIN WITHOUT THE WRITTEN PERMISSION
OF EPYGI TECHNOLOGIES LTD. IS STRICTLY PROHIBITED.
Revised By
GagikM
LianaB
AshotS
Isolde Trautwein
DOCUMENT
CONTAINS
DISCLOSURE
OF
THE
Date
21 Mar 05
22 Mar 05
24 Mar 05
29.Mar 05
CONFIDENTIAL
AND
DOCUMENT
OR
THE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Quadro4x and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Epygi Quadro4x

Summary of Contents for Epygi Quadro4x

  • Page 1 SupportTemplate.dot Last saved: 29.03.2005 16:08 by Isolde Trautwein Abstract: This document explains how to connect the Mediatrix 1204 to Quadro4x/16x and configure both devices so that the Mediatrix FXO ports can be used as additional Quadro FXO ports. Please Note:...

  • Page 2: Table Of Contents

    Increasing Quadro FXO Capability with Mediatrix Table of Contents: Introduction ................3 Prerequisites ................3 Configuration .................3 3.1 Quadro Setup................3 3.1.1 DHCP Server Configuration ..........3 3.1.2 Call Routing Configuration ..........4 3.2 Mediatrix 1204 Setup .............8 3.2.1 Configuring the Mediarix as a DHCP Client......8 3.2.2 Local Port Configuration ..........

  • Page 3: Introduction

    The Mediatrix 1204 is an analogue gateway that allows connectivity between the PSTN and a VoIP network. The device can be used with the Quadro4x/16x to emulate additional FXO ports. This document describes how to configure the Quadro with the Mediatrix 1204 to increase Quadro FXO capability.

  • Page 4: Call Routing Configuration

    From the Telephony menu select the Call Routing item and click on the Local Routing Table. The Call Routing - Local Routing page is displayed (Figure 2 The local routing table). Figure 2: The local routing table Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.
  • Page 5 Port field empty if the Mediatrix uses 5060 por t number (this is the default port number used on the Quadro). • Set the Fail Reason to “Any” and click Next. Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.
  • Page 6 Increasing Quadro FXO Capability with Mediatrix You may omit the other fields blank or fill with the values you find necessary (for the descriptions of those parameters refer to Manual II: Administrator’s Guide for Quadro4x, Quadro4xi, Quadro16x and Quadro16xi). Figure 4: Local Call Routing Wizard - page 2 The last page of the wizard gives the summary of the rule to be created (Figure 5 Local Ca Routing Wizard - page 3).
  • Page 7 If the user dials 9 followed by a PSTN number (or 9+ # + PSTN number) and o free FXO line is available on the Quadro (they are either in use or disabled), the call will go through Mediatrix FXO port. Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.

  • Page 8: Mediatrix 1204 Setup

    On the main page of the Mediatrix GUI (Figure 7 The main page of the Mediatrix GUI) right click the Administration tab and select Edit (Figure 8). This opens the Adminstration dialog box enabling you to modify IP configuration settings. Figure 7 The main page of the Mediatrix GUI Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.
  • Page 9 Enable the checkbox Use DHCP in the IP Configuration group and click OK (Figure 9 Enabling the DHCP client on the Mediatrix). Figure 9 Enabling the DHCP client on the Mediatrix Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.

  • Page 10: Local Port Configuration

    From the Country list box select the country in which the Mediatrix is used to allow the latter to set the country-specific parameters (tones, rings, etc.) according to your choice (Figure 11 Selecting the country). Figure 11 Selecting the country Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.

  • Page 11: Setting The Mediatrix Proxy Server

    In the SIP Proxy field enter the Quadro LAN IP address (you can get the Quadro LAN IP address from the System menu Status Network Status item). Make sure the checkbox Use DHCP is disabled (Figure 13). Figure 13 Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.

  • Page 12: Redirecting Incoming Calls To Quadro

    In the corresponding cell of the Automatic call address column enter the Quadro extension the call is to be redirected to. (In Figure 15 calls to FXO ports 1-3 are redirected o Quadro Auto Attendant, calls to port 4 to Quadro extension 24). Figure 15 Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.

  • Page 13: Restrictions With Additional Fxo Lines

    SIP inste ad of PSTN. • There is no way to select an FXO line for outgoing calls. All calls go through pool mode. Copyright © 2004 Epygi Technologies, Ltd. All rights reserved.

This manual is also suitable for:

Quadro4xiQuadro16xQuadro16xi

Table of Contents