Electrical connection
5.3.2.3. Terminal compartment: close
38
SA 25.1
SA 48.1/SAR 25.1
Figure 39: Terminal compartment: close
[1]
Cover (figure shows S version)
[2]
Screws for cover
[3]
O-ring
[4]
Screws for socket carrier
[5]
Socket carrier
[6]
Blanking plug
[7]
Cable gland (not included in delivery)
Short-circuit due to pinching of cables!
Risk of electric shock and functional failures.
Carefully fit socket carrier to avoid pinching the cables.
1.
Check whether O-ring [3] is in good condition, replace if damaged.
2.
Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the O-ring and
insert it correctly.
3.
Fasten cable glands and blanking plugs applying the specified torque to ensure
the required enclosure protection.
SAR 30.1 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Modbus RTU