Motor Connection; Motor Connection Compartment: Open; Motor Cables: Connect - AUMA SA 25.1 Operating Instructions Manual

Electrical connection
5.3.1.

Motor connection

5.3.1.1. Motor connection compartment: open

5.3.1.2. Motor cables: connect

34
SA 25.1 SA 48.1/SAR 25.1
Figure 33: Motor connection compartment: open
[1] Cover
[2] Screws for cover
[3] O-ring
[4] Cable gland
Hazardous voltage!
Risk of electric shock.
Disconnect device from the mains before opening.
1. Loosen screws [2] and remove cover [1].
2. Insert cable gland suitable for connecting cable.
The enclosure protection IP... stated on the name plate is only ensured if suit-
able cable glands are used.
Figure 34: Name plate, example with enclosure protection IP68
Table 19:
Terminal cross sections and terminal tightening torques
Type Speed
SA 25.1 4 22
SAR 25.1
32 90
SA 30.1 4 22
SAR 30.1
32 45
63 90
SA 35.1 4 5.6
8 22
32 45
SAR 30.1 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Modbus RTU
Terminal cross sections
2
0.5 16 mm
2
2.5 35 mm
2
4 16 mm
2
10 35 mm
2
16 70 mm
2
4 16 mm
2
10 35 mm
2
16 70 mm
Tightening torques
2.0 Nm
3.5 Nm
1.2 2.4 Nm
4.0 5.0 Nm
6.0 12 Nm
1.2 2.4 Nm
4.0 5.0 Nm
6.0 12 Nm