SA 25.1
SA 48.1/SAR 25.1
AC 01.2 Non-Intrusive Modbus RTU
5.3.
Electrical connection of actuator
Information
SAR 30.1 Control unit: electronic (MWG)
Figure 31: Connection arrangement for sizes 25.1
[1]
Motor connection compartment for nominal currents exceeding 25 A
[2]
Cable entry for motor connection
[3]
Electrical connection (S) for control connections as well as for motor connec-
tions up to 25 A (only available for actuator controls on wall bracket).
Figure 32: Connection arrangement for size 48.1
[1]
Motor connection compartment
[2]
Cable entry for motor connection
[3]
Electrical connection (S) for control connections (only available for actuator
controls on wall bracket)
Motor connection is performed within motor connection compartment [1] for motors
with nominal currents exceeding 25 A. Motor connection can also be made via the
pins for motors at the electrical connection [3] in case of lower nominal currents.
Electrical connection
40.1
33