Call Data Output; Interface Configuration - Aastra Ascotel IntelliGate A150 System Manual

7. 5

Call data output

ICL, OCL and ICC data is output to printers or other output devices via a V.24 inter-
face of a Pocket Adapter, a V.24 interface of the PBX (20x5 systems only) or the
Ethernet interface. It is possible to configure which data is output on which of the
available interfaces. Up to 4 output devices can be connected at the same time.
Fig. 133 Output concept
See also:
The call data can also be accepted and processed further by OIP. For more
details please refer to the "Open Interfaces Platform". System Manual
7. 5. 1

Interface configuration

One Ethernet interface and two V.24 interfaces are available on each basic system
2025/2045/2065. The basic systems 150/300 have two Ethernet interfaces but no
V.24 interfaces. One V.24 interface is also additionally available on each Pocket
Adapter:
• The V.24 interfaces and the Ethernet interface on the basic system are set in the
System Configuration.
• The V.24 interface on an Pocket Adapter is set at the back of the Pocket Adapter
using a DIP switch.
Call logging (CL)
System Functions and Features as of I7.9
261