End-Of-Selection Signal - Aastra Ascotel IntelliGate A150 System Manual

System Functions and Features as of I7.9
8. 6. 3

End-of-selection signal

The input of an external number can be completed with the character #. The PBX
(or network system) interprets this as the end of selection and immediately
switches through.
Detailed Description
Dialling with end-of-selection signal is important in several cases:
• when dialling an external number in an open numbering plan
page 388).
• when the LCR (Least Cost Routing) function is activated: In this case the PBX has
to wait until the user has entered all the digits before it can forward the com-
plete number to the network provider configured. The end-of-selection signal
does not require any additional waiting time
• With SIP terminals on a PBX and a PBX connected via an SIP provider to the pub-
lic network. Without end-of-selection the waiting time is 4 seconds.
Fig. 187 Dialling with end-of-selection signal
388
(Fig. 187,
(Fig. 188, page 389).
Features