Routing Functions Of The Trunk Group For Incoming Calls; Trunk Group Identification Functions; Other Trunk Group Functions And Settings - Aastra Ascotel IntelliGate A150 System Manual

System Functions and Features as of I7.9
4. 2. 2 Routing Functions of the Trunk Group for Incoming
Calls
The following incoming routing functions are assigned to the trunk group:
• Restricting the number of calls incoming simultaneously per trunk group
• Routing a call to one of the following elements:
– Direct dialling plan (see
– Call distribution element (see
– Destination of the internal numbering plan (see
• Adapting the numbering plan identifier of an incoming call
Restricting the Number of Calls Incoming Simultaneously per Trunk Group
Once the set limit is reached
routed via the trunk group. This is signalled to the caller by means of the conges-
tion tone.
After an initialization the limit is set to approx. 80% of the available B channels.
4. 2. 3

Trunk Group Identification Functions

The CLIP numbers of outgoing calls can be influenced by the settings in the trunk
group configuration. For more details see
following.
Truncate CLIP
See "Trunk groups", page
4. 2. 4

Other Trunk Group Functions and Settings

Name of the trunk group
Name is used to assign a name to each trunk group The name's main purpose is to
provide orientation It is displayed on some system terminals whenever an outgo-
ing connection is set up.
78
page 85)
page 88)
(Incoming connections
"CLIP with Outgoing Calls", page
57.
page 148)
setting), no more calls are
Routing elements
46and