If the phone number has a route selection prefix, the call will be routed via the cor-
responding route.
Note:
If a number has a route selection prefix and if NPI is E.164, the call will be
routed via the transit route without truncating the prefix.
The exchange access prefix is set under
of the source PINX.
[1]
One and the same trunk group cannot contain both analogue and digital network interfaces.
Transit routing for private leased-line network → public network with exchange access prefix
Fig. 97
Tab. 77
Settings for PINX 2 routing parameters
Parameter
Route 1:
•
Trunk groups
•
Numbering plan identifier NPI
•
Type of number TON
•
Send access code
Trunk group 1:
•
Network interfaces
•
Network type
•
Protocol
PINX 1 routing parameters as in
Call routing
System Functions and Features as of I7.9
Send access code
Parameter value
1 (reference number of one or more trunk group(s))
Unknown
Unknown
170
Network interfaces of this trunk group
Private
PSS1
(QSIG)
Tab. 76, page
in the route configuration
218.
219