Reject Call - Aastra Ascotel IntelliGate A150 System Manual

8. 4. 5

Reject call

Calls for B are rejected during the ringing phase. This immediately clears down the
call set-up and therefore the ringing at B. User A obtains the busy tone.
Fig. 170 Rejecting a call during the ringing phase
Detailed Description
Tab. 153 Reject call
Operating sequence / signalling
Interface
on the terminal
B The activation of the feature is not
confirmed.
Other properties:
• If the called user is busy and the calling user activates call waiting, the call can
also be rejected.
• A configured CFNR, a CFB or an entry in the CDE configuration under
answer or CDE if busy
• If a user who is in a user group along with other users rejects a call, the other us-
ers continue to ring (unless
section below). If all the UG members reject the call, the call set-up is cleared
down and the calling user obtains the busy tone.
• For each user a
internal and external calls. Possible redirection destinations include internal or
external users, PISN users, abbreviated dialling numbers, user groups, CDE call
numbers, etc. This means the response if the call is rejected can vary according
to the call's origin, e.g. Voice Mail for internal calls and transfer for external calls
(see "Default diversions per user", page
Features
System Functions and Features as of I7.9
are not executed after a call has been rejected.
Default call forwarding if rejected
Default call forwarded if rejected
A B
haz0926aaxxa0
Scope
• System terminals with display via the Foxkey
• ISDN terminals that support the feature. (The response
after rejection varies from one manufacturer to the next)
can be configured separately for
149).
CDE if no
is configured, see
337