Aastra Ascotel IntelliGate A150 System Manual page 432

System Functions and Features as of I7.9
Prefix Dialling Procedures
Tab. 272 Private calls with PIN: Procedure
Private call with PIN from one of one's own termi-
nals or from a third-party terminal
Other properties:
• During a call the procedure can also be made from an enquiry call.
• The called party sees the caller's user number and not the number of the user
whose terminal is being used by the caller.
• For reasons of data protection no entry is made in the redial register.
• Unlike with procedure #36 (making calls with your own settings but on a third-
party phone) you cannot hang up after activating the function and then prefix
dial within 60 seconds.
• The same PINs are used as for the phone lock.
• Users without their own terminals can be defined as virtual users, and can then
also use this feature.
System Configuration requirements:
• For this feature to be used, the initialization PIN must be changed first (see
"Locking / unlocking terminals (telephone lock)", page 426
• A private exchange access must not be defined or the private exchange access
prefix must be barred for all users using internal digit barring.
Note:
#46 temporarily bypasses any exchange access barring and the exter-
nal digit barring of the user identified by means of his user number
and PIN.
Reference to Other Features
Features:
• "Making calls with your own settings on a third-party telephone", page 430
• "Unlocking the terminal for each call", page 427
432
*/# procedure
#46 <User No.> <PIN> <external call number>
for the syntax).
Features