Aastra Ascotel IntelliGate A150 System Manual page 145

Parameter
Direct dialling plan 1:
• DD number 20
Call distribution element 2:
• Destinations
• Incoming connections
Routing without Direct Dialling
A call without a suitable direct dial number is routed to the call destination via the
call distribution element allocated in the trunk group.
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 63 Routing a call from the public network without direct dialling
Tab. 31 Setting the routing parameters
Parameter
Trunk group 1:
• Network interfaces
• Incoming connection
• Network type
• Protocol
• Overwrite NPI
• Direct dialling plan
Call routing
System Functions and Features as of I7.9
Parameter value
2 (reference number of a call distribution element)
Switch position 1: User 220 + KT
Number of connections allowed simultaneously
Parameter value
Network interfaces in this trunk group
Number of connections allowed simultaneously
1)
Public
1)
DSS1
1)
No
1 (relevant only if a suitable DD number is found)
145