Product Description; Device Identification; Table 1: Numerical Code - KEB COMBIVERT F6 Instructions For Use Manual

PrODUCT DESCrIPTION

2 Product Description
The safety manual completes the installation manual of the COMBIVERT with the safety module of
type 1. It contains safety-related supplements and regulations for the operation of devices in safety
applications. The basic standards as well as application and country-specific standards must be
observed furthermore. The standards referred in this instruction manual must be observed supple-
mentary !
The safety module type 1 according to IEC 61800-5-2 contains:
• Safe torque off (Safe Torque Off - STO)
• Safe brake control (Safe Brake Control – SBC)
The safety functions meet the requirements in accordance with performance level e (ISO13849-1) and
SIL 3 (IEC 61508 and IEC 62061). In case of proper project design, installation and operation the
safety functions protect people against mechanical damages.

2.1 Device identification

Numerical code:
Safety module type 1
01H6x10-0027
01H6x10-0029
01H6x10-0028
Table 1: Numerical code
Attention
Used in
Servo controller
Inverter
Single axis controller
Double axis controller
Validity of certificates
The certification of COMBIVERT with safety technology is only valid if
the material number corresponds with the specified numerical code und
the FS logo is printed on the type plate.
COMBIVErT
xxS6A1x-xxxx
xxF6A1x-xxxx
xxH6ABx-xxxx
xxH6BBx-xxxx
15