DESCrIPTION OF THE TErMINALS
4.2 Outputs
The short-circuit proof, digital outputs are specified in accordance with IEC61131-2. The output rated
current is 100 mA.
4.2.1 Output STO
Output (status-STO) provides a 24V signal if the modulation is possible.
4.2.2 Output SBC
Output (status SBC) provides a 24V signal if the brakes are released (see „6.3 Functional descrip-
tion SBC").
4.2.3 Brake output
The position of the terminals and specification of the brake output is described in the respective
COMBIVERT manual. The free-wheeling path to control the brake is integrated in the COMBIVERT.
4.3 Status LEDs
The arrangement of the LEDs is stored in the corresponding COMBIVERT manual.
4.3.1 Status-LED safety module
The LED indicate the state of the safety module.
LED
Off
Green
Red
Table 10:
Status-LED safety module
Further status messages see chapter „6 Functional Descriptions".
Status
No voltage supply of the safety module
Safety module in operation
Safety module in error
23