Product Description; Intended Use - KEB COMBIVERT F6 Instructions For Use Manual

PRODUcT DEScRIPTION

2 Product Description
The unit series F6 is a series of single axis drive converters. These devices are equipped
with a diagnostic interface (description see F6 control boards). The F6 operators can be
connected to this interface.
These operators can perform the following tasks:
• Providing a user surface (keyboard and display)
• Providing a diagnostic interface (USB or Ethernet)
The operators can not perform the following tasks:
• Providing of interfaces for permanent installation (fieldbuses / IO / etc.)

2.1 Intended use

The COMBIVERT serves exclusively for the control and regulation of three-phase mo-
tors. It is intended for the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the type
plate and from the instruction manual and must be strictly observed.
The used semiconductors and components of the KEB Automation KG are developed
and dimensioned for the use in industrial products.
Restriction
If the product is used in machines, which work under exceptional conditions or if essen-
tial functions, life-supporting measures or an extraordinary safety step must be fulfilled,
the necessary reliability and security must be ensured by the machine builder.
10
Information about the F6 control boards can be found
here.
www.keb.de/fileadmin/media/Manuals/dr/ma_dr_f6-cu-a-inst-20118593_en.pdf
Information about the F6-K control boards can be found
here.
www.keb.de/fileadmin/media/Manuals/dr/ma_dr_f6-cu-k-inst-20144795_en.pdf
Information about the F6-P control boards can be found
here.
www.keb.de/fileadmin/media/Manuals/dr/ma_dr_f6-cu-p-inst-20182705_en.pdf