Configuration - ETC Sensor3 CEM3 User Manual

Input Voltage

Configuration

WARNING:
70
Min Scale
0 V
1%
RISK OF ELECTRIC SHOCK! Failure to disconnect all power to the dimmer rack
before working inside could result in serious injury or death.
De-energize main feed to the dimmer rack and follow appropriate Lockout/
Tagout procedures as mandated by NFPA 70E. It is important to note that
electrical equipment such as dimmer racks can present an arc flash hazard if
improperly serviced. This is due to the high amounts of short-circuit current
available on the electrical supply to this equipment. Any work must comply
with OSHA Safe Working Practices.
Curve scales linearly
from min scale value
to 100%
Control Input
100%
CEM3 User Manual