ETC Sensor3 CEM3 User Manual page 56

Rack #1 - CEM3 Rack Dimmer Set/Override
[Set Local Levels] System OK
Space:
[Set System Levels]
[Dimmer Check]
DMX A: Off DMX B: Off
[Release Systm Lvls]
[Presets] sACN: 1/1
[Sequences]
[Release All Arch] [Quick Setup] [Info] [Cancel]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
configured to one space.
Rack #1 - CEM3 Rack Dimmer Set/Override
System OK [Set Local Levels]
[Set System Levels]
[Dimmer Check]
Space:
DMX A: Off [Release Systm Lvls] DMX B: Off
sACN: 1/1 [Presets]
[Sequences]
[Quick Setup] [Release All Arch] [Info]
[Record Rig Check]
[Cancel]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack Dimmer Set/Override
System OK [Set Local Levels]
[Set System Levels]
[Dimmer Check]
[Release Systm Lvls] DMX A: Off DMX B: Off
[Presets] sACN: 1/1
[Sequences]
[Quick Setup] [Release All Arch] [Info]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack Dimmer Set/Override
System OK [Set Local Levels]
[Set System Levels] Space:
[Dimmer Check]
DMX A: Off [Release Systm Lvls] DMX B: Off
sACN: 1/1 [Presets]
[Sequences]
[Quick Setup] [Release All Arch] [Info]
[Cancel]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack Dimmer Set/Override
[Set Local Levels] System OK
[Set System Levels] Space:
[Dimmer Check]
DMX A: Off [Release Systm Lvls] DMX B: Off
sACN: 1/1 [Presets]
[Sequences]
[Release All Arch] [Quick Setup] [Info] [Cancel]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
Rack #1 - CEM3 Rack Dimmer Set/Override
[Set Local Levels] System OK
[Set System Levels] Space:
[Dimmer Check]
DMX A: Off [Release Systm Lvls] DMX B: Off
[Presets] sACN: 1/1
[Sequences]
[Release All Arch] [Quick Setup] [Info] [Cancel]
[Record Rig Check]
[Run Rig Check]
[Clear Rig Check]
50
Space:
Select Space
Preset:
[1]
Space1 [Activate]
[Snapshot/Record]
Fade Time(s):
[OK]
Note:
This screen is not shown
if lugs in the rack are
Select Space
Space
[1]
Sequence
Space1
[Activate]
[Edit Steps]
[Auto Setup]
[OK]
Note:
Space
Sequence
[Activate]
[Edit Steps]
This screen is not shown
[Auto Setup]
if lugs in the rack are
configured to one space.
Space
Sequence
[Activate]
[Edit Steps]
[Auto Setup]
Release All Arch
All Arch levels
have been released
About Dimmer 1
Select Space Record Rig Check
[1] Recording Rig Check
Space1
[OK] <back to abort>
Note:
This screen is not shown
if lugs in the rack are
configured to one space.
Select Space Run Rig Check
[1] Running Rig Check
Space1 Please Wait...
Fading Look Up: 5s
[OK] <back to abort>
Note:
Run Rig Check
No rig check look has
been recorded. Select
This screen is not shown
if lugs in the rack are
[Record Rig Check]
configured to one space.
to save a rig check
Note:
Select Space Clear Rig Check
[1] Rig Check Look
Space1
[OK]
Space1 Space:
[1]
Preset:
Preset1 Sp1
Preset1 Sp1
[Deactivate]
[Snapshot/Record]
[2] Fade Time(s):
Sequence Sequence
Space1 Space
Inactive Sequence
[Deactivate]
[Edit Steps]
[Auto Setup]
Sequence Edit Step
Space1 Step
Inactive Fade Time(s)
Hold Time(s)
[Record]
[Delete Step]
[Insert Step After]
Sequence Auto Setup
Space1
Inactive This will auto create
a sequence to turn on
all switched mode
circuits.
Number of Steps:
The seconds displayed will
count down from the property
in 5s
Note: AF Reaction Time set in
Setup/Dimmers/Advanced Feat
toward zero before
recording a rig check
Run Rig Check
Running Rig Check
Please Wait...
Measuring Loads: 5s
<back to abort>
This screen is displayed
if no rig check look has been
Note:
recorded. Select [OK] to return
to Dimmer Set/Override.
look.
[OK]
Cleared
Space1
[1]
[2]
Space1
Active
[1] of 1
[0]
[5]
[6]
[Apply]
General Note: Rig Check
options are only available
in racks with AF enabled
and are not available in
non-AF and FDX racks.
look.
These screens are displayed
if a rig check look has been
recorded. The seconds displayed
will count down from the property
AF Reaction Time (set in
Setup/Dimmers/Advanced Features)
Note:
toward zero as the look fades up,
and the seconds will count down
again as the loads are measured
while the look is held. Select [Back]
to return to the DimmerSet/Override
screen.
CEM3 User Manual