Ui Preferences - ETC Sensor3 CEM3 User Manual

UI Preferences

Adjust various settings regarding the user interface. Edit these settings in the UI Preferences Setup
screen [Setup]>UI Preferences.
Field
Backlight Mode
Backlight Time
Contrast
Language
Temp Locale
sACN
16
Adjust the settings of the backlight behind the display window. Choices are
On, Off, and Auto. Auto will illuminate the window after a button press or
boot up for the time specified in Backlight Time. Default is Auto.
Appears only when Backlight Mode is set to Auto. Specify the time in
minutes and seconds (between 0:10 and 9:59) for the backlight to stay lit
after a reboot or button press. Default is 3:00.
Set the contrast of the display window. This can also be done from the
home screen by holding the back arrow and using the scroll wheel.
Set the display language for the display window. Default is English.
Set the units used for the temperature display, Celsius (C) or Fahrenheit (F).
Default is F.
Set the method of displaying sACN addresses: Universe/Channel (Uni/Ch) or
absolute address (Abs). Default is Uni/Ch.
Description
CEM3 User Manual