Set Levels; Setup; Presets And Sequences - ETC Sensor3 CEM3 User Manual

Set Levels

This page allows you to set and release levels for any
circuit in the rack.
You can use the displayed keypad or a connected
keyboard to input commands into the green
command window.
Once the command line reaches complete syntax it
will be automatically entered as signified by a "*" at
the end of the command line.
• Select the desired space using the Select Space
field at top (if applicable).
• Use the and button and thru button to select
multiple circuits or ranges of circuits.
• Use the A/B button to specify any dimmer
doubled circuits (if applicable).
• Use the rel button to release channels.
• Use Release All to release all current levels.
• Use Previous and Next to cycle through
successive channels.
• Clear clears the command line.

Setup

This page allows you to alter the Control Mode or Curve for any circuit in the rack. Click Apply Changes
when you have completed all the desired changes.

Presets and Sequences

Use this page to activate or deactivate a sequence or activate, deactivate, or record a preset for a
selected space. For more information on presets, see
for more information on sequences, see
Web Access and Mobile App
Recording and Playing Presets
Recording and Playing Sequences
Presets Page
Set Levels Page
page 27
on
page 29
on .
, and
43