Table of Contents
Advertisement
Preset Menu
Presets are recorded by taking a snapshot of the current levels for all circuits assigned to the space
are set to be included in presets
in presets, any level it is currently using will be withheld from the record action.
To record or play back a preset:
1:
Set the desired output levels for any dimmers in your rack using any method (methods include
[Test]>Set Local Levels and [Test]>Set System Levels on a CEM3 module, using a DMX source,
or using a sACN source).
2:
Using the CEM3 face panel, navigate to [Test]>Presets. The Select Space screen will appear (if
multiple spaces exist).
3:
Select the space for which you want to record the preset (if applicable) and then select OK. The
Preset screen will open.
4:
Select the preset (1–64), and then choose the appropriate options:
• [Activate/Deactivate]: [Enter] toggles the preset between on and off.
• [Record]: [Enter] records the current levels for the space to the selected preset.
• Fade Time(s): Set the desired time (in seconds) for the preset to fade in when activated and
fade out when deactivated. Range is from 0–360 seconds. Default is 2 seconds.
5:
After you have recorded the preset, release the output levels ([Test]>Release Set Levels) or turn
off the control source data.
28
Allow in Preset
(see
on
page 19
). If a circuit is not set to be included
that
CEM3 User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the Sensor3 CEM3 and is the answer not in the manual?