Setup - ETC Sensor3 CEM3 User Manual

Setup

Commonly used features found here include:
• changing dimmer, rack, and network settings
• enabling control ports
• changing operating mode
• upgrading software or backing up the rack configuration
• changing curve and firing mode
Field
Dimmers
Rack
Circuit Assignment
Patching
Network
File Operations
Panic
Time/Date
Quick Setup
UI Preferences
System Reference
View and adjust the settings for any circuit in any rack connected to the
Dimmer Property Definitions
network. See
View and adjust the settings for the host Sensor3 rack. See
Definitions page 20
on
Assign the space, circuit number, and module type for any circuit slot in the
rack. You can auto assign or manually edit the options for any circuit.
For single and half-density modules such as the D20F, select Edit Circuit
Layout to adjust circuit numbering before you perform final patch updates.
Edit the patch and functionality for any port (DMX or sACN). See
on page 34 .
Set up and edit network properties for the CEM3. See
the Network page 35
on
Save configurations, load configurations, or upgrade CEM3 software using
either a USB memory device or an FTP server. See
and Firmware page 30
on
Record a panic look and set the specific details (such as fade and delay
times) for when a panic look is executed. See
Set the rack's time and date, or switch between automatic or manual time
setting.
Quickly set up the rack configuration. For more information see
a Quick Setup on page 4
Adjust various settings regarding the user interface. See
page 16
.
Description
on
.
.
.
.
page 17
.
Rack Property
Patching
Setting Up CEM3 on
Saving or Uploading Files
Setting Up Panic page 32
on
Performing
UI Preferences
.
on
15