Table of Contents
Advertisement
Status and Statistics
RMON
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
•
Alarms Page—Configures the occurrences that trigger an alarm.
To define RMON events:
Click Status and Statistics > RMON > Events.
This page displays previously defined events.
The fields on this page are defined by the Add RMON Events dialog box except for the Time
field.
•
Time—Displays the time of the event. (This is a read-only table in the parent window
and cannot be defined).
Click Add.
Enter the parameters.
•
Event Entry—Displays the event entry index number for the new entry.
•
Community—Enter the SNMP community string to be included when traps are sent
(optional). Note that the community must be defined using the
pages for the trap to reach the Network Management Station.
•
Description—Enter a name for the event. This name is used in the Add RMON Alarm
page to attach an alarm to an event.
•
Notification Type—Select the type of action that results from this event. Values are:
-
None—No action occurs when the alarm goes off.
-
Log (Event Log Table)—Add a log entry to the Event Log table when the alarm is
triggered.
-
Trap (SNMP Manager and Syslog Server)—Send a trap to the remote log server
when the alarm goes off.
-
Log and Trap—Add a log entry to the Event Log table and send a trap to the remote
log server when the alarm goes off.
•
Owner—Enter the device or user that defined the event.
Click Apply. The RMON event is saved to the Running Configuration file.
Click Event Log Table to display the log of alarms that have occurred and that have been
logged (see description below).
4
Notification Recipients
64
Hide quick links:
Advertisement
Table of Contents
