Cisco SX350 Series Administration Manual page 366

IP Configuration
IPv4 Management and Interfaces
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Click Apply. The settings are written to the Running Configuration file.
DHCP Snooping Trusted Interfaces
Packets from untrusted ports/LAGs are checked against the DHCP Snooping Binding database
(see the DHCP Snooping Binding Database
By default, interfaces are trusted.
To designate an interface as untrusted:
Click IP Configuration > IPv4 Management and Interfaces > DHCP Snooping/Relay >
DHCP Snooping Trusted Interfaces.
Select the interface and click Edit.
Select Trusted Interface (Yes or No).
Click Apply to save the settings to the Running Configuration file.
DHCP Snooping Binding Database
See How the DHCP Snooping Binding Database is Built
entries are added to the DHCP Snooping Binding database.
Note the following points about maintenance of the DHCP Snooping Binding database:
• The device does not update the DHCP Snooping Binding database when a station
moves to another interface.
• If a port is down, the entries for that port are not deleted.
• When DHCP Snooping is disabled for a VLAN, the binding entries that collected for
that VLAN are removed.
• If the database is full, DHCP Snooping continue to forward packets but new entries are
not created. Note that if the IP source guard and/or ARP inspection features are active,
the clients that are not written in the DHCP Snooping Binding database are not be able
to connect to the network.
To add entries to the DHCP Snooping Binding database:
page).
for a description of how dynamic
15
276