Ping - Cisco SX350 Series Administration Manual

5
Discovery - Bonjour
Discovery - LLDP
Discovery - CDP

Ping

STEP 1
STEP 2
77
See Bonjour.
See Discover - LLDP.
See Discovery - CDP.
The Ping utility tests if a remote host can be reached and measures the round-trip time for
packets sent from the device to a destination device.
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to
the target host and waiting for an ICMP response, sometimes called a pong. It measures the
round-trip time and records any packet loss.
To ping a host:
Click Administration > Ping.
Configure ping by entering the fields:
• Host Definition—Select whether to specify the source interface by its IP address or
name. This field influences the interfaces that are displayed in the Source IP field, as
described below.
• IP Version—If the source interface is identified by its IP address, select either IPv4 or
IPv6 to indicate that it will be entered in the selected format.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Administration
Discovery - Bonjour