Cisco SX350 Series Administration Manual page 258

Smartport
Built-in Smartport Macros
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
#macro keywords $voice_vlan
#
#macro key description:
#
#Default Values are
#$voice_vlan = 1
#
smartport switchport trunk allowed vlan remove $voice_vlan
no smartport switchport trunk native vlan
smartport switchport trunk allowed vlan remove all
#
no port security
no port security mode
no port security max
#
no smartport storm-control broadcast enable
no smartport storm-control broadcast level
no smartport storm-control include-multicast
#
spanning-tree portfast auto
#
@
switch
[switch]
#macro description switch
#macro keywords $native_vlan $voice_vlan
#
#macro key description:
configured on the port
#
#Default Values are
#$native_vlan = Default VLAN
#$voice_vlan = 1
#
#the default mode is trunk
smartport switchport trunk allowed vlan add all
smartport switchport trunk native vlan $native_vlan
#
spanning-tree link-type point-to-point
#
@
no_switch
[no_switch]
#macro description No switch
#macro keywords $voice_vlan
#
#macro key description:
$voice_vlan: The voice VLAN ID
$native_vlan: The untag VLAN which will be
$voice_vlan: The voice VLAN ID
$voice_vlan: The voice VLAN ID
10
198