Cisco SX350 Series Administration Manual page 202

Managed switches
Hide thumbs Also See for SX350 Series:
Table of Contents

Advertisement

Port Management
Link Aggregation
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
LAG—Select the LAG ID number.
LAG Type—Displays the port type that comprises the LAG.
Description—Enter the LAG name or a comment.
Administrative Status—Set the selected LAG to be Up or Down.
Operational Status—Displays whether the LAG is currently operating.
Link Status SNMP Traps—Select to enable generation of SNMP traps notifying of
changes to the link status of the ports in the LAG.
Time Range—Select to enable the time range during which the port is in Up state.
When the time range is not active, the port is in shutdown. If a time range is configured,
it is effective only when the port is administratively Up.
Time Range Name—Select the profile that specifies the time range. If a time range is
not yet defined, click Edit to go to the
Operational Time-Range State—Displays whether the time range is currently active
or inactive.
Administrative Auto Negotiation—Enables or disable auto-negotiation on the LAG.
Auto-negotiation is a protocol between two link partners that enables a LAG to
advertise its transmission speed and flow control to its partner (the Flow Control default
is disabled). It is recommended to keep auto-negotiation enabled on both sides of an
aggregate link, or disabled on both sides, while ensuring that link speeds are identical.
Operational Auto Negotiation—Displays the auto-negotiation setting.
Administrative Speed—Select the speed of the ports in the LAG.
Operational LAG Speed—Displays the current speed at which the LAG is operating.
Administrative Advertisement—Select the capabilities to be advertised by the LAG.
The options are:
-
Max Capability—All LAG speeds and both duplex modes are available.
-
10 Full—The LAG advertises a 10 Mbps speed and the mode is full duplex.
-
100 Full—The LAG advertises a 100 Mbps speed and the mode is full duplex.
-
1000 Full—The LAG advertises a 1000 Mbps speed and the mode is full duplex.
-
10000 Full—The LAG advertises a 10000 Mbps speed and the mode is full duplex.
This is only supported on the 550 family.
Time Range
page.
9
152

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents