Table of Contents
Advertisement
Administration: File Management
File Operations
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
The following combinations of copying internal file types are allowed:
•
From the Running Configuration to the Startup Configuration or other backup file.
•
From the Startup Configuration to the Running Configuration or other backup file.
•
From a backup file to the Running Configuration or Startup Configuration.
•
From the Mirror Configuration to the Running Configuration, Startup Configuration or
a backup file.
The following sections describe these operations.
To update a system configuration file using HTTP/HTTPS, USB or Internal Flash:
Click Administration > File Management > File Operations.
Enter the following fields:
•
Operation Type—Select Update File.
•
Destination File Type—Select one of the configuration file types to update.
•
Copy Method—Select HTTP/HTTPS, USB or Internal Flash.
•
File Name—Enter name of file to be updated from (source file).
Click Apply to begin the operation.
To update a system configuration file using TFTP:
Click Administration > File Management > File Operations.
Enter the following fields:
•
Operation Type—Select Update File.
•
Destination File Type—Select one of the configuration file types to update.
•
Copy Method—Select TFTP.
•
Server Definition—Select whether to specify the TFTP server by IP address or by
domain name.
If Server Definition is By Address:
-
IP Version—Select whether an IPv4 or an IPv6 address is used.
6
80
Hide quick links:
Advertisement
Table of Contents
