Security: 802.1X Authentication
Overview
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Workflow 2: To configure traps
Click Security > 802.1X/MAC/Web Authentication > Properties.
Select the required traps.
Click Apply, and the Running Configuration file is updated.
Workflow 3: To configure 802.1x-based, MAC-based authentication or Web-based
authentication
Click Security > 802.1X/MAC/Web Authentication > Port Authentication.
Select the required port and click Edit.
Enter the fields required for the port.
The fields in this page are described in
Click Apply, and the Running Configuration file is updated.
Use the Copy Settings button to copy settings from one port to another.
Workflow 4: To configure the quiet period
Click Security > 802.1X/MAC/Web Authentication > Port Authentication.
Select a port, and click Edit.
Enter the quiet period in the Quiet Period field.
Click Apply, and the Running Configuration file is updated.
Workflow 5: To configure the guest VLAN:
Click Security > 802.1X/MAC/Web Authentication > Properties.
Select Enable in the Guest VLAN field.
Select the guest VLAN in the Guest VLAN ID field.
Configure the Guest VLAN Timeout to be either Immediate or enter a value in the User
defined field.
Click Apply, and the Running Configuration file is updated.
Port
Authentication.
17
320