Table of Contents
Advertisement
Smart Network Application (SNA)
Right-Hand Information Panel
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
The following information is displayed for a client group:
Parameter Name
Notes
Host Name
This is the host name of the client group's
parent device.
This parameter and all other information on the
parent device appears under a Connected to
header.
String of a maximum of 58 characters
IP Address of
Displays the IP address used by SNA to connect
parent device
to the parent device. Additional advertised
addresses (IPv4 and IPv6) can be seen by
pressing an icon next to the label.
MAC Address of
The base MAC address of the parent device.
parent device
Connected
This label appears if the client group is
Through Cloud
connected to the network through a cloud. The
label replaces the host name, IP address and
MAC address.
The following information is displayed for Interfaces:
Parameter Name
Notes
Interface Name
Interface Type
Displayed only for ports
Status
The operational status of the interface.
The parameters below only appear when View all is clicked.
Interface
Uses the value of the interface's ifAlias MIB.
Description
String with a maximum of 64 characters.
29
Example
RND_1
192.168.1.55
923:a8bc::234
00:00:b0:83:1f:ac
Example
GE1/14
LAG12
Copper-1G
Up
Down
Down (ACL)
"WS 28"
662
Hide quick links:
Advertisement
Table of Contents
