Cisco SX350 Series Administration Manual page 567

25
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
551
Attach the policy to a VLAN, port or LAG using either the
Policy Attachment (Port)
Router Advertisement Guard Work Flow
In the RA Guard Settings
In this same page, set the global configuration values that are used if no values are set in a
policy.
If required, either configure a user-defined policy or add rules to the default policies for the
feature.
Attach the policy to a VLAN, port or LAG using either the
Policy Attachment (Port)
DHCPv6 Guard Work Flow
In the DHCPv6 Guard Settings
In this same page, set the global configuration values that are used if no values are set in a
policy.
If required, either configure a user-defined policy or add rules to the default policies for the
feature.
Attach the policy to a VLAN, port or LAG using either the
Policy Attachment (Port)
Neighbor Discovery Inspection Work Flow
In the ND Inspection Settings
In this same page, set the global configuration values that are used if no values are set in a
policy.
If required, either configure a user-defined policy or add rules to the default policies for the
feature.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
pages.
page, enter the list of VLANs on which this feature is enabled.
pages.
page, enter the list of VLANs on which this feature is enabled.
pages.
page, enter the list of VLANs on which this feature is enabled.
Security: IPv6 First Hop Security
Common Tasks
Policy Attachment (VLAN)
Policy Attachment (VLAN)
Policy Attachment (VLAN)
or
or
or