3
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
31
Enter the fields:
•
Interface—Select the IP interface for the system.
•
IP Interface Source—Select one of the following options:
-
DHCP—Select for the device to receive its IP address from a DHCP server.
-
Static—Select to enter the IP address of the device manually.
If you selected Static as the IP address type, enter the following fields:
•
IP Address—IP address of the interface.
•
Network Mask—IP mask for this address.
•
Administrative Default Gateway—Enter the default gateway IP address.
•
DNS Server—Enter the IP address of the DNS server.
Click Next
Enter the fields:
•
Username—Enter a new user name between 0 and 20 characters. UTF-8 characters are
not permitted.
•
Password—Enter a password (UTF-8 characters are not permitted). If the password
strength and complexity is defined, the user password must comply with the policy
configured in
Password
•
Confirm Password—Enter the password again.
•
Password Strength—Displays the strength of password. The policy for password
strength and complexity are configured in the
•
Keep current username and password—Select to keep current username and
password.
Click Next
Enter the fields:
•
Clock Source—Select one of the following:
-
Manual Settings—Select to enter the device system time. If this is selected, enter the
Date and Time.
-
Default SNTP Servers—Select to use the default SNTP servers.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Strength.
Password Strength
Configuration Wizards
Getting Started Wizard
page.