Cisco SX350 Series Administration Manual page 391

Managed switches
Hide thumbs Also See for SX350 Series:
Table of Contents

Advertisement

15
STEP 6
STEP 1
301
-
No-Onlink—Configures the specified prefix as not onlink. A no onlink prefix is
inserted into the routing table as a connected prefix but advertised with a L-bit clear.
-
Offlink—Configures the specified prefix as offlink. The prefix will be advertised
with the L-bit clear. The prefix will not be inserted into the routing table as a
connected prefix. If the prefix is already present in the routing table as a connected
prefix (for example, because the prefix was also configured by adding an IPv6
address), it will be removed.
Click Apply to save the configuration to the Running Configuration file.
IPv6 Default Router List
The IPv6 Default Router List page enables configuring and viewing the default IPv6 router
addresses. This list contains the routers that are candidates to become the device default router
for non-local traffic (it may be empty). The device randomly selects a router from the list. The
device supports one static IPv6 default router. Dynamic default routers are routers that have
sent router advertisements to the device IPv6 interface.
When adding or deleting IP addresses, the following events occur:
When removing an IP interface, all the default router IP addresses are removed.
Dynamic IP addresses cannot be removed.
An alert message appears after an attempt is made to insert more than a single user-
defined address.
An alert message appears when attempting to insert a non-link local type address,
meaning 'fe80:'.
To define a default router:
Click IP Configuration > IPv6 Management and Interfaces > IPv6 Default Router List.
This page displays the following fields for each default router:
Interface—Outgoing IPv6 interface where the default router resides.
Default Router IPv6 Address—Link local IP address of the default router.
Type—The default router configuration that includes the following options:
-
Static—The default router was manually added to this table through the Add button.
-
Dynamic—The default router was dynamically configured.
Metric—Cost of this hop.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
IP Configuration
IPv6 Management and Interfaces

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents