Cisco SX350 Series Administration Manual page 264

Managed switches
Hide thumbs Also See for SX350 Series:
Table of Contents

Advertisement

11
203
The following types of ports can be members in a private VLAN:
Promiscuous—A promiscuous port can communicate with all ports of the same
private VLAN. These ports connect servers and routers.
Community (host)—Community ports can define a group of ports that are member in
the same Layer 2 domain. They are isolated at Layer 2 from other communities and
from isolated ports. These ports connect host ports.
Isolated (host)—An isolated port has complete Layer 2 isolation from the other
isolated and community ports within the same private VLAN. These ports connect host
ports.
The following types of private VLANs exist:
Primary VLAN—The primary VLAN is used to enable Layer 2 connectivity from
promiscuous ports to isolated and to community ports. There can only be a single
primary VLAN per private VLAN.
Isolated VLAN (also known as a Secondary VLAN)—An isolated VLAN is used to
enable isolated ports to send traffic to the primary VLAN. There can only be a single,
isolated VLAN per private VLAN.
Community VLAN (also known as a Secondary VLAN)—To create a sub-group of
ports (community) within a VLAN, the ports must be added a community VLAN. The
community VLAN is used to enable Layer 2 connectivity from community ports to
promiscuous ports and to community ports of the same community. There can be a
single community VLAN for each community and multiple community VLANs can
coexist in the system for the same private VLAN).
See
Figure 1
and
Figure 2
Host traffic is sent on isolated and community VLANs, while server and router traffic is sent
on the primary VLAN.
Shared MAC address learning exists between all the VLANs that are members in the same
private VLAN (although the switch supports independent VLAN learning). This enables
Unicast traffic, despite the fact that host MAC addresses are learned by isolated and
community VLANs, while routers and server MAC addresses are learned by the primary
VLAN.
A private VLAN-port can only be added to one private VLAN. Other port types, such as
access or trunk ports, can be added to the individual VLANs that make up the private VLAN
(since they are regular 802.1Q VLANs).
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
for samples of how these VLANs are used.
VLAN Management
Overview

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents