Cisco SX350 Series Administration Manual page 234

Smartport
Overview
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
• Router
• Wireless Access Point
Smartport types are named so that they describe the type of device connected to an interface.
Each Smartport type is associated with two Smartport macros. One macro, called "the macro"
serves to apply the desired configuration. The other, called "the anti-macro," serves to undo all
configuration performed by "the macro" when that interface happens to become a different
Smartport type.
You can apply a Smartport macro by the following methods:
• The associated Smartport type.
• Statically from a Smartport macro by name only from the CLI.
A Smartport macro can be applied by its Smartport type statically from CLI and GUI, and
dynamically by Auto Smartport. Auto Smartport derives the Smartport types of the attached
devices based on CDP capabilities, LLDP system capabilities, and/or LLDP-MED
capabilities.
The following describes the relationship of Smartport types and Auto Smartport
Smartport Type
Unknown
Default
Printer
Desktop
Guest
Server
Host
IP camera
IP phone
IP phone desktop
Switch
Router
Wireless Access Point
Supported by Auto Smartport
No
No
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
10
Supported by Auto Smartport
by default
No
No
No
No
No
No
No
No
Yes
Yes
Yes
No
Yes
174