Partial Reset; Dall Reset - Icom IC-705 Basic Manual

Hf/vhf/uhf all mode transceiver

Hide thumbs Also See for IC-705:

Table of Contents

Resetting

Partial reset

1. Open the RESET screen.

» SET > Others > Reset

2. Touch "Partial Reset."

3. Touch [YES].

LAfter resetting, the default VFO mode screen

is displayed.

1. Open the RESET screen.

» SET > Others > Reset

2. Touch "All Reset."

3. Touch [NEXT].

4. After carefully reading the displayed

message, touch [YES] to perform the All

reset.

LAfter resetting, the default VFO mode screen

is displayed.

When you cannot enter the Set mode

If a touch screen operation error or an

unexpected operation occurs, you cannot

enter the Set mode. In this case, perform an

All reset, as described below:

1. Turn OFF the transceiver.

2. While holding down

10-2

MAINTENANCE

and

, push

Table of Contents

Do you have a question about the IC-705 and is the answer not in the manual?