Maintenance; Resetting; D Partial Reset - Icom ID-52A Basic Manual

10

MAINTENANCE

■ Resetting

Occasionally, erroneous information is displayed when, for example, first applying power.
This may be caused externally by static electricity or by other factors.
If this problem occurs, perform a Partial reset or an All reset.
BE CAREFUL! An All reset clears all programming and returns all settings to the factory
defaults. See the Advanced manual for details.
After performing an All reset, you cannot use the DR function because the Repeater List
contents are also cleared.

D Partial Reset

[MENU] > SET > Others > Reset > Partial Reset
1. Push [MENU].
2. Select "Others" in the "SET" menu.
3. Select "Reset."
4. Select "Partial Reset."
• The confirmation dialog is displayed.
5. Select "YES."
• "PARTIAL RESET" is displayed, and then the display automatically returns to the default
screen.
TIP: A Partial Reset resets the operating settings to their defaults without clearing the
following:
• Memory Channel contents
• Scan Edge contents
• Call sign memories
• Bluetooth pairing list
37
• Call Channel contents
• Message data
• DTMF memory contents
• Opening picture
• Radio Memory contents
• GPS memory contents
• Repeater list