Chapter 3 Installation Of Receiver; Names Of Parts Of Receiver; Example Of Connection To Receiver - Ko Propo EX-1UR Operation Manual

Chapter 3 Installation of Receiver

NAMES OF PARTS OF RECEIVER

BATT: SW harness

Example of connection to receiver

Depending on the receiver, the layout of each channel and the battery channel is different. Connect the
connector by checking carefully the indication on the receiver.
Electric-powered car (ESC + FET servo for 6 V)
Receiver
Speed controller
Aerial wire
CH1: Steering servo
CH2: ESC or throttle servo
6 V FET servo for
steering
Crystal
CH3
Engine car 1 (servo for 6 V)
5N600mAh 6 V battery
Receiver
SW harness
Throttle
servo
Steering servo