Improving The Throttle Response (T:quickr, Throttle Quick Reaction) - Ko Propo EX-1UR Operation Manual

Press the + key or the – key to change the set
3
value in the reversing side.
The value can be set in the range of -100 to 100%.
A larger value enlarges the movement angle of
servo caused when you start moving the throttle
trigger.
Quick
Neutral
If you press the + key and the – key simul-
taneously, the set value is set to 0%.
Press the back (function) key to return to the
4
normal screen.
The setting contents are stored.
In the case of quick curve (the value is +),
the reaction is large at the beginning and
becomes slow gradually.
In the case of mild curve (the value is –),
the reaction is small at the beginning and
becomes quick gradually.
To change only the reaction at the start
of turning, adjust it at "T:PUNCH" (throttle
punch). (See page 26.)
To combine this item with other setting
items, change the setting of one item at a
time while checking the result.
Mild
Trigger Operation
Half Full Throttle
Improving the throttle response
(T:QuickR, Throttle quick reaction)
The response to throttle operation can be im-
proved further from the state that has been set in
the response mode. (See "Switching the move-
ment mode (response mode)" on page 9.)
Press the down key or the up key to display "T:
1
QuickR."
Press the + key or the – key to change the set
2
value.
The value can be set to OFF or in the range of 10 to
120% (in 10% increments). A larger value increases
the response speed.
If you press the + key and the – key simul-
taneously, the set value is set to OFF.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.