Improving The Steering Response (S:quickr, Steering Quick Reaction); Setting The Servo Speed According To The Rudder Angle (S:speed, Steering Speed) - Ko Propo EX-1UR Operation Manual

Improving the steering response (S:QuickR,
Steering quick reaction)
The response to steering operation can be im-
proved further from the state that has been set in
the response mode. (See "Switching the move-
ment mode (response mode)" on page 9.)
Press the down key or the up key to display
1
"S:QuickR."
Press the + key or the – key to change the set
2
value.
The value can be set to OFF or in the range of 10 to
120% (in 10% increments). A larger value increases
the response speed.
If you press the + key and the – key simul-
taneously, the set value is set to OFF.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.
Setting the servo speed according to the
rudder angle (S:SPEED, Steering speed)
The maximum speeds of steering servo for steer-
ing turning direction (TURN) and steering returning
direction (RETURN) are set.
When 2WAY is selected, the area from the neutral
position to the maximum rudder angle is divided
in two and the steering servo speed can be set in
each area.
Time
Maximum
Operating
Wheel
Turning
Neutral
Time
Maximum
Servo
movement
Neutral
Neutral
End
1) Press the down key or the up key to display
1
"S:SPEED."
2) Press the enter key.
To exit the menu, press the back (function) key.
Returning
Speed
changing
point
Speed
Neutral
End