Switching The Movement Direction (T:revers, Throttle Reverse); Quickening The Initial Reaction (T:punch, Throttle Punch) - Ko Propo EX-1UR Operation Manual

Switching the movement direction
(T:REVERS, Throttle reverse)
If the movement direction of servo or ESC is re-
verse, set the movement direction of throttle to
reverse (REVE).
When using ESC for an electric-powered
car, if the ESC can recognize automatically
the movement direction under the standard
setting, the reverse setting is not required
on the transmitter.
Press the down key or the up key to display "T:
1
REVERS."
Press the + key or the – key to change the
2
setting.
NORM: Normal. This means normal direction.
REVE: Reverse. The movement direction is re-
verse.
If you press the + key and the – key simul-
taneously, the set value is set to NORM.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.
Quickening the initial reaction
(T:PUNCH, Throttle punch)
When you operate the throttle trigger, the reaction
becomes quick by skipping the initial area.
This item is effective for clearing the time
lag at clutch meet for an engine car or for
adjusting the intensity of brake at the start
of activation.
This item is effective for quickening the
reaction of ESC in the forwarding side or
the brake side for an electric-powered car.
1) Press the down key or the up key to display
1
"T:PUNCH."
2) Press the enter key.
To exit the menu, press the back (function) key.
1) Press the + key or the – key to change the
2
set value in the forwarding side.
The value can be set in the range of 0 to 100%.
A larger value increases the movement angle of
servo caused when you start moving the throttle
trigger.
2) Press the up key.
If you press the + key and the – key simul-
taneously, the set value is set to 0%.