Table of Contents
Advertisement
Quickening the initial reaction of steering
(S:PUNCH, Steering punch)
When you start turning the steering wheel, the re-
action becomes quick only in the initial area.
Press the down key or the up key to display
1
"S:PUNCH."
Press the + key or the – key to change the set
2
value.
The value can be set in the range of 0 to 100%.
A larger value increases the movement angle of
servo caused when you start turning the steering
wheel.
If you press the + key and the – key
simultaneously, the set value is set to 0%.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.
This setting is effective when backlash of
steering linkage is large. The straightness
is, however, not improved.
To combine this item with other items such
as "S:SPEED" (steering speed), change the
setting of one item at a time while checking
the result.
Wheel Angle
Adjusting the rudder angle and the servo
movement angle (S:CURVE, Steering curve)
The variation of servo movement angle relative to
the rudder angle of steering wheel is adjusted. The
reaction to the rudder angle can be set to quick (+)
or mild (–).
Press the down key or the up key to display
1
"S:CURVE."
Press the + key or the – key to change the set
2
value.
The value can be set in the range of -100 to 100%.
A larger value enlarges the movement of servo when the
rudder angle is small and softens the reaction gradually.
A smaller value softens the movement of servo when the
rudder angle is small and enlarges the reaction gradually.
If you press the + key and the – key simul-
taneously, the set value is set to 0%.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.
To change only the reaction at the start of
turning, adjust it at "S:PUNCH" (steering
punch). (See page 19.)
To combine this item with other items such
as "S:SPEED" (steering speed), change the
setting of one item at a time while checking
the result.
Wheel Operation
Advertisement
Table of Contents
