Stop Watch (#S.watch, Stop Watch) - Ko Propo EX-1UR Operation Manual

Stop watch (#S.WATCH, Stop watch)

The stop watch can be used for measuring lap
time.
1) Press the down key or the up key to display
1
"#S.WATCH."
To measure the time immediately:
Press the + (start) key or the button that has been
assigned in step 4 to start measurement.
Press the – (stop) key or the button that has been
assigned in step 4 to stop measurement.
When the measurement stops, pressing again the
+ (start) key or the button that has been assigned
in step 4 will resume the measurement.
Pressing and holding down the – (stop) key or the
button that has been assigned in step 4 will reset
the time to 00:00:00.
2) Press the enter key.
Press the up key.
2
3
4
– (stop) key – (stop) key
+ (start) key + (start) key
5
To start time measurement the moment the
throttle trigger is pulled:
Press the enter key.
When the throttle trigger is pulled, time measure-
ment starts.
To stop measurement, press the – (stop) key.
When the measurement stops, pressing the + (start)
key will resume the measurement.
Pressing and holding down the – (stop) key will
reset the time to 00:00:00.
Press the up key.
Lap time of each lap
1) Press the + key or the – key to select the
button for starting/stopping measurement.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.
1) Press the + key or the – key to select the
button for lap time measurement.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.
Number of laps