Response and quick reaction function setting
By setting "S:QuickR" (steering quick reaction)
and "T:QuickR" (throttle quick reaction), the re-
sponse can be further improved. (See "Improving
the steering response" on page 20 and "Improving
the throttle response" on page 28.)
0%
Receivers that support ultrahigh speed
response are only KR-302FS.
50%
120%
Switching the mode
Before starting work, ensure that the
receiver and the ser vo to be used
support the desired response mode.
(See "Response mode support table" on
page 11.)
Select the response mode of transmitter at
1
"#RESPONS" in the function menu of the main
body.
(See "Setting the output frame" on page 40.)
Also at "#CHSELCT" in the function menu,
2
similarly, set the channels that can be used in
the response mode that has been set in step 1.
(See "Setting the number of output channels" on
page 40.)
In addition, set "S:QuickR" and "T:QuickR" as
3
required.
(See "Improving the steering response" on page 20
and "Improving the throttle response" on page 28.)