Keeping The Throttle Amount Constant At Startup (T:auto.s, Auto Start) - Ko Propo EX-1UR Operation Manual

Keeping the throttle amount constant at
startup (T:AUTO.S, Auto start)
When the throttle trigger is pulled at startup, the
throttle position is set to the preset position.
When the throttle trigger is returned a little, the
setting is released and the throttle can be oper-
ated normally.
1) Press the down key or the up key to display
1
"T:AUTO.S."
2) Press the enter key.
To exit the menu, press the back (function) key.
1) Press the + key or the – key to select the
2
button for starting auto start.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.
1) Press the + key or the – key to set the
3
throttle trigger position for turning on auto
start.
The value can be set in the range of 0 to 100%.
2) Press the up key.
If you press the + key and the – key simul-
taneously, the set value is set to 0%.
1) Press the + key or the – key to set the
4
throttle position (servo position) at the time
of auto start.
The value can be set in the range of 0 to 100%.
2) Press the up key.
If you press the + key and the – key simul-
taneously, the set value is set to OFF.
Press the back (function) key to return to the
5
normal screen.
The setting contents are stored.
Press the button that has been selected in
6
step 2 to turn on or off auto start.
Be sure to carry out a test before using
this function.
In the initial state, the BT1 button can also be
used to set "T:AUTO.S" (throttle auto start).
Press the button to turn on or off auto start.
BT1 button