Throttle Related Setting; Displaying The Throttle Trigger Operation Amount (T:monit, Throttle Monitor); Adjusting The Neutral Position (T:trm, Throttle Trim) - Ko Propo EX-1UR Operation Manual

THROTTLE RELATED SETTING

Displaying the throttle trigger operation
amount (T:MONIT, Throttle monitor)
The current throttle trigger movement position can
be checked.
Press the down key or the up key to display "T:
1
MONIT."
Move the throttle trigger.
2
Throttle trigger Throttle trigger
Moves according to the
movement of throttle
trigger.
If the direction of throttle operation is
reverse, the movement of the throttle trigger
is contrary to the monitor display.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.

Adjusting the neutral position (T:TRM, Throttle trim)

To adjust the neutral position during driving,
change the setting. (See "Setting the trim and sub
trim" on page 13.)
In the case of an electric-powered car,
trim adjustment is basically not required if
standard setting is performed in the ESC side.
The ends of movement angle do not move.
Only the neutral position will move.
To move also the ends of movement angle,
adjust "T:SUBTRM" (throttle sub trim). (See
page 25.)
Press the down key or the up key to display "T:
1
TRM."
Press the + key or the – key to change the trim value.
2
The value can be set in the range from B50 through
0 to F50.
If you press the + key and the – key simul-
taneously, the trim value is set to 0.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
The setting contents are stored.
In the initial state, the ET2 lever can also be
used to set "T:TRM" (throttle trim). Move the
lever up or down to change the set value.
Even if you press the + key and the – key simul-
taneously, however, the set value is not set to 0.
ET2 lever