Adjusting The Throttle Trigger Operation Amount And The Servo Movement Angle (T:curve, Throttle Curve) - Ko Propo EX-1UR Operation Manual

Press the + key or the – key to change the set
3
value in the reversing side.
The value can be set in the range of 0 to 100%.
A larger value increases the movement angle of
servo caused when you start moving the throttle
trigger.
Neutral
If you press the + key and the – key simul-
taneously, the set value is set to 0%.
Press the back (function) key to return to the
4
normal screen.
The setting contents are stored.
Note that depending on the set values
of other throttle related menu items,
the throttle reaction becomes like an
ON/OFF switch.
When combining this item with "T:ABS"
(ABS), check the operation carefully.
Trigger Operation
Half
Full Throttle
Adjusting the throttle trigger operation amount and
the servo movement angle (T:CURVE, Throttle curve)
The variation of servo movement angle relative to
the operation amount of throttle trigger is adjusted.
The reaction to the throttle trigger operation can
be set to quick (+) or mild (–).
1) Press the down key or the up key to display
1
"T:CURVE."
2) Press the enter key.
To exit the menu, press the back (function) key.
1) Press the + key or the – key to change the
2
set value in the forwarding side.
The value can be set in the range of -100 to
100%.
A larger value enlarges the movement angle of
servo caused when you start moving the throttle
trigger.
2) Press the up key.
If you press the + key and the – key simul-
taneously, the set value is set to 0%.