Copying Model Memory (#M.copy, Model Copy); Naming Model Memory (#M.name, Model Name) - Ko Propo EX-1UR Operation Manual

Copying model memory (#M.COPY, Model copy)

The contents of the current model memory are
copied to another model memory.
If you wish to change the setting finely according
to the conditions and so on for the same car body,
copying the model memory and modifying the data
make the setting easier.
When copying is perfor med, the model
memory of copy destination is overwritten.
After checking that overwriting is no
problem, carry out the following operation.
1) Press the down key or the up key to display
1
"#M.COPY."
2) Press the enter key.
Press the down key or the up key to select the
2
model memory number for copy destination.
Selected model memory number of copy source
Model name of
copy source
If you may copy, press the enter key.
3
The setting contents are copied.
If you do not copy, press the back (function) key.

Naming model memory (#M.NAME, Model name)

A model memory is named for identification.
A name can be given to a new model memory or
an exiting model name can be edited.
1
2
3
Model memory
number of copy
destination
4
1) Press the down key or the up key to display
"#M.NAME."
2) Press the enter key.
1) Press the down key or the up key to select
the cursor position.
2) Press the + key and the – key to input char-
acters.
Cursor
(A character can be input
at this position.)
Repeat step 2 to input the model name.
After completing the input, press the back
(function) key to return to the normal screen.
The setting contents are stored.