Setting The Throttle Reaction Speed (T:speed, Throttle Speed) - Ko Propo EX-1UR Operation Manual

Setting the throttle reaction speed
(T:SPEED, Throttle speed)
By controlling the throttle speed so that the servo
does not react quickly even if the throttle trigger is
moved fast, you can easily control the car.
When 2WAY or 3WAY is selected, the area from
the neutral position to the full throttle is divided in
two or three and the throttle servo speed can be
set in each area.
1) Press the down key or the up key to display
1
"T:SPEED."
2) Press the enter key.
To exit the menu, press the back (function) key.
1) Press the + key or the - key to select the
2
button for switching ON/OFF the speed
function.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.
1) Press the + key or the – key to select the
3
number of steps (1WAY, 2WAY or 3WAY)
for switching the speed in acceleration.
2) Press the up key.
If 1WAY is selected:
1) Press the + key or the - key to set the
4
speed for acceleration.
The value can be set in the range of 1% to
100%.
2) Press the up key.
If you press the + key and the – key simul-
taneously, the set value is set to 100%.
Proceed to step 9.