Moving The Throttle Servo To A Set Position (T:idleup, Throttle Idle Up) - Ko Propo EX-1UR Operation Manual

Press the back key to return to the normal
11
screen.
The setting contents are stored.
By pressing the button that has been set in step
12
2, you can turn on or off the speed function.
When the throttle speed is effective, the
throttle speed indicator blinks.
Throttle speed Throttle speed
indicator indicator
This setting is effective for not only an
engine car but also an electric-powered car
with ESC.
Moving the throttle servo to a set position
(T:IDLEUP, Throttle idle up)
When the ET levers or the BT buttons of this unit
are operated, the throttle servo is moved to a set
position (preset).
This function can be used for engine cut, idling up,
full brake, and reversing.
Caution!
When using this function, be sure to check
the operation.
Incorrect setting may cause running out of control
or damage to the car.
If you do not use this function, do not as-
sign any function to buttons.
If a button is pressed by mistake, the car may run
out of control or may be damaged.
1) Press the down key or the up key to display
1
"T:IDLEUP."
2) Press the enter key.
To exit the menu, press the back (function) key.
1) Press the + key or the - key to select the
2
button for turning on or off this function.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.