3Ch/4Ch Setting; Displaying The Movement Amount (3Chmonit, 3Ch Monitor) (4Chmonit, 4Ch Monitor); Setting The Output Amount At Each Position (3Chsetup, 3Ch Setup) (4Chsetup, 4Ch Setup) - Ko Propo EX-1UR Operation Manual

3CH/4CH SETTING

When using a channel expansion adapter, perform 3ch or 4ch setting.
KR-302F/FS/FSC and KR-301F/FS are not used for 4ch type receiver, but are used only for 3ch.
Use the appropriate receiver for 4ch. (it will be put on sale)
The setting wethod is the same for 3ch and 4ch, and refer to 3ch screen as below.
Displaying the movement amount (3chMONIT,
3ch monitor) (4chMONIT, 4ch monitor)
The current movement amount of 3ch (or 4ch) can
be checked.
Press the down key or the up key to display
1
"3chMONIT" (or "4chMONIT").
Operate 3ch or 4ch.
2
Moves according to the movement amount. Moves according to the movement amount.
Press the back (function) key to return to the
3
normal screen or press the down key or the up
key to select another function menu item.
Setting the output amount at each position
(3chSETUP, 3ch setup) (4chSETUP, 4ch setup)
A button for operating 3ch or 4ch and the output
amount at each position (positions 1 to 5) are set.
1) Press the down key or the up key to display
1
"3chSETUP" or "4chSETUP."
2) Press the enter key.
To exit the menu, press the back (function) key.
1) Press the + key or the – key to select the
2
button for operating 3ch or 4ch.
Select OFF, ET1 to ET5 or BT1.
2) Press the up key.